The Importance of the Guitar Neck

guitar necks

Executive Summary about Guitar Neck by Victor Epand

The guitar neck is usually considered to be a collective term, and refers to the section of a guitar including the fret board, the headstock and truss rod, if included, and the frets along the fret board. Effectively then, the guitar neck is the whole of the long wooden part of a guitar that extends from the round body. The guitar neck is not usually a straight flat board, but curved or bent slightly. Although the guitar neck is usually wooden, there are examples of guitars which are traditionally made with other material.

The point at which the guitar neck joins the body is often referred to as the heel (a little confusing having the neck connected to the body using a heel!) and is generally glued, although in the case of some acoustic guitars and all electric guitars it is also bolted, especially where steel strings are used. Generally the joints are constructed using very traditional woodworking methods, such as mortise and tenon and dovetail, although Spanish guitars often use their own traditional heel neck joint, named after the traditional Spanish shoe which the joint looks a little like.

Learn Guitar Parts – The Guitar Neck

Executive Summary about Guitar Neck by Ricky Sharples

If your guitar neck is worn out maybe you’re looking for someone who can replace or repair it. Or maybe you want to repair your guitar neck yourself. Your guitar’s neck needs some understanding, so let’s take a look at some common issues associated with the neck of your guitar.

Let’s start with the frets. They’re the metal things that are embedded in the guitar neck. The trick is to remove the frets without destroying the fingerboard. This involves softening the glue holding the frets in and then gently removing the frets. Sometimes the back of the guitar neck can be worn down. In this case you can smooth the wood with steel wool and sand paper. Sometimes guitar players find that their guitar’s neck is getting sticky. It may not affect your guitar if you remove all the strings but as a matter of the long term upkeep of your instrument, it’s best to keep your guitar neck under a uniform amount of stress.

If you want to get a new bolt-on neck for an old guitar you might be wondering whether any neck will fit or if you need to replace it with the same brand. In this case the most important factor is the length of the neck.